I needed to test in the lab whether my Cisco router can handle more than 300K routes - size of current full BGP table. Now, Cisco router can only accept 200
network statements under
router bgp configuration, so I would need 1500 routers. Even if I had that many routers to my disposal, it would have taken days to configure all of them. As always, open source software can help.
Quagga lets you run OSPF, BGP, RIP, RIPng on Linux and Solaris. If you go with all default options, it is very easy to install.
Download and unpack. Go to quagga directory, in my case it was quagga-0.98.6, type
./configure
make
sudo make install
That's it. By default, it went into /usr/local/. I have Debian 4 (Etch) with 2.6.8 kernel and a lot of development packages installed. The only thing I had to do was to add /usr/local/lib to /etc/ld.so.conf file and run /sbin/ldconfig.
Here is the setup
Now I need a valid configuration file for Quagga BGP. Adding 300000 network statements manually is not something system administrators do on Linux. Hence, here is the script
#!/usr/bin/perl
my $host="quagga-host"; #quagga router name
my $logpass="zebra"; #login password
my $enable="zebra"; #enable password
my $myasn="65099"; #local AS number
my $router_id="172.31.2.2"; #bgp router-id
my $remote_as="65001"; #remote-as number
my $remote_ip="172.31.2.1"; #BGP neighbor ip address
my $route_count=0;
my $max_routes=300000; #max number of routers to generate
open (BGPCONF,'>bgpd.conf')|| die "Can not open bgpd.conf for writing";
print BGPCONF "hostname $host\npassword $logpass\nenable password $enable\nline vty \n";
print BGPCONF "router bgp $myasn\n bgp router-id $router_id\n neighbor $remote_ip remote-as $remote_as\n";
MAXR: while ($route_count <= $max_routes ) {
$octet1=int(rand(223))+1; #generate 1st octet randomly in 1-223 range, 224 and up is multicust and class E
if ($octet1 ==127) {next;} #need to make sure that 127.X.X.0/24 is excluded $octet2=0;
while ( $octet2 <= 255 ){
$octet3=0;
while ( $octet3 <= 255 ) {
print BGPCONF " network $octet1\.$octet2\.$octet3\.0/24\n";
$octet3++;
$route_count++;
if ($route_count == $max_routes) {last MAXR;}
}
$octet2++;
}
}
close BGPCONF;
this script will generate bgpd.conf for Quagga. Since it is lab environment not connected to any real network, I do not really care about zebra configuration or restricting access to Quagga BGP console. Copy bgpd.conf file into /usr/local/etc and run
/usr/local/sbin/bgpd -d -f /usr/local/etc/bgpd.conf -u root -g root Again, this is not production environment. Do not run Quagga as root in production. Here is relevant configuration from Cisco router:
interface GigabitEthernet0/0
ip address 172.31.2.1 255.255.255.0
network 172.31.2.0 mask 255.255.255.0
media-type rj45
negotiation auto
!
router bgp 65001
no synchronization
bgp log-neighbor-changes
neighbor 172.31.2.2 remote-as 65099
no auto-summary
!
Let's see if it works. On Linux host:
sh-2.05b$ telnet localhost 2605
Trying 127.0.0.1...
Connected to localhost.localdomain.
Escape character is '^]'.
Hello, this is Quagga (version 0.98.6).
Copyright 1996-2005 Kunihiro Ishiguro, et al.
User Access Verification
Password:
quagga-host> sho ip bgp summ
BGP router identifier 172.31.2.2, local AS number 65099
2 BGP AS-PATH entries
0 BGP community entries
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
172.31.2.1 4 65001 283 606 0 0 0 03:41:55 1
Total number of neighbors 1
quagga-host>
on Cisco:
R1#sho ip bgp sum
BGP router identifier 192.0.2.2, local AS number 65001
BGP table version is 330002, main routing table version 330002
310001 network entries using 40920132 bytes of memory
310001 path entries using 16120052 bytes of memory
3/2 BGP path/bestpath attribute entries using 444 bytes of memory
1 BGP AS-PATH entries using 24 bytes of memory
0 BGP route-map cache entries using 0 bytes of memory
0 BGP filter-list cache entries using 0 bytes of memory
Bitfield cache entries: current 1 (at peak 2) using 32 bytes of memory
BGP using 57040684 total bytes of memory
BGP activity 310001/0 prefixes, 320001/10000 paths, scan interval 60 secs
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
172.31.2.2 4 65099 602 322 330002 0 0 03:38:59 310000
Yep. It works.
